等离子体破裂期间电流猝灭特征研究

等离子体破裂会对托卡马克装置的安全运行造成严重威胁.等离子体破裂期间电流猝灭速率与电磁负载的大小及逃逸电流平台的形成都密切相关.本文对HL-2A装置等离子体破裂进行了统计分析,统计选用等离子电流的两个衰减区间90%-10%和80%-20%.分析结果表明:HL-2A装置等离子体破裂有四种不同的电流猝灭波形,两个衰减区间最小电流猝灭时间的参数区分别为2.6 ms和2.2 ms,并且不同衰减区间下平均电流猝灭时间统计分布明显不同.     

新郑西亚斯东周玉器材料属性与加工工艺的科技分析

中国玉文化源远流长，治玉工艺经过各个时代的不断发展和完善，在一定程度上能反映古代社会生产力发展水平及文化、贸易、技术交流等信息。利用能量色散型X射线荧光光谱（EDXRF）、激光拉曼光谱（LRS）、超景深光学显微系统（OM）等分析技术，结合硅胶覆膜微痕复制技术，对河南省新郑西亚斯东周墓地出土的一批玉器进行科技分析。首先利用化学成分和物相结构分析技术确定了玉器材质的矿物属性，其次利用显微分析技术表征了玉器表面及穿孔内部和印模的加工痕迹，特别是阴刻纹饰和穿孔微痕特征，最后探讨了玉器样品的材料属性和加工工艺两者之间的联系。化学成分和物相结构分析结果表明，所分析的西亚斯东周玉器材质丰富，主要矿物组成有滑石、透闪石、水晶、云母等。玉器表面纹饰微痕特征分析表明，所分析玉器阴刻工艺采用了两种加工工具，分别是砣具和手持硬质工具。穿孔微痕分析特征表明，钻孔包括单面钻孔和双面/多面钻孔两种方式，钻孔工艺则有实心钻、管钻等。部分玉器钻孔形状和内部微痕特征表明，尽管均采用了实心钻工艺，但所采用的实心钻头在形状上存在差异，同时，也存在是否配合解玉砂进行钻孔的差异。不同材料属性的玉器采用了不同的加工工艺。滑石质玉器，莫氏硬度1，器型主要为玉片饰，其表面阴刻纹饰主要采用手持硬质工具进行刻画，钻孔主要采用了双面钻孔方式，并使用了实心钻头未添加解玉砂进行加工，钻头形状可能为圆锥状；云母质玉器，莫氏硬度2~3，器型主要为玉玦片饰，纹饰采用了砣具添加解玉砂的加工工艺，钻孔方式为单面钻孔，采用了管钻工艺。透闪石型玉器，莫氏硬度5~6，器型主要为玉片饰，表面纹饰采用砣具配合解玉砂砣刻，以双面钻孔的方式为主，钻孔工艺为实心钻头配合解玉砂工艺，钻头形状与滑石类样品一致，为圆锥状。水晶质玉器，莫氏硬度7，均为珠饰，表面无纹饰，钻孔方式为双面/多面钻孔，钻孔工艺为实心钻配合解玉砂工艺，且钻头可能为圆柱形。研究结果表明，玉器表面纹饰所采用的阴刻工艺和钻孔工艺，与玉器本身的材料属性、器型等存在密切关系。     

含酰胺结构超低膨胀聚酰亚胺薄膜的热膨胀行为

采用联苯二酐与3种含酰胺结构二胺制备了具有不同取代基团的聚酰胺-酰亚胺薄膜, 考察了酰胺结构对薄膜力学、 耐热及尺寸稳定性的影响, 研究了聚集态结构与薄膜热膨胀行为的关系和规律. 该系列薄膜具有超高强度和优异的耐热性能, 拉伸强度高达280.5 MPa, 玻璃化转变温度在389~409 ℃, 并在30~300 ℃温度范围内表现出超低负膨胀, 热膨胀系数(CTE, ppm/℃, 即10 ⁶ cm·cm ^-1·℃ ^-1)在-3.05~-1.74 ppm/℃之间. 聚集态分析结果表明, 酰胺结构使分子链间形成了强氢键相互作用, 分子链在薄膜面内方向高度有序取向, 并在膜厚方向堆积更为紧密, 使薄膜表现出热收缩现象. 通过不同体积大小的取代基团进一步调控分子链间相互作用及排列堆积, 可实现薄膜在高温下近乎零尺寸形变, 为设计制备超低膨胀聚合物基板材料提供了新思路.     

Determination of the Absolute Configuration of Super-Carbon-Chain Compounds by a Combined Chemical,Spectroscopic, and Computational Approach: Gibbosols A and B

Marine dinoflagellates produce remarkable organic molecules, particularly those with polyoxygenated long-carbon-chain backbones, namely super-carbon-chain compounds (SCCCs), characterized by the presence of numerous stereogenic carbon centers on acyclic polyol carbon chains. Even today, it is a challenge to determine the absolute configurations of these compounds. In this work, the planar structures and absolute configurations of two highly flexible SCCCs, featuring either a C₆₉- or C₇₁-linear carbon backbone, gibbosols A and B, respectively, each containing thirty-seven stereogenic carbon centers, were unambiguously established by a combined chemical, spectroscopic, and computational approach. The discovery of gibbosols A and B with two hydrophilic acyclic polyol chains represents an unprecedented class of SCCCs. A reasonable convergent strategy for the biosynthesis of these SCCCs was proposed.     

Fabricating Dual-Atom Iron Catalysts for Efficient Oxygen Evolution Reaction: A Heteroatom Modulator Approach

Understanding the thermal aggregation behavior of metal atoms is important for the synthesis of supported metal clusters. Here, derived from a metal–organic framework encapsulating a trinuclear Fe^III₂Fe^II complex (denoted as Fe₃) within the channels, a well-defined nitrogen-doped carbon layer is fabricated as an ideal support for stabilizing the generated iron nanoclusters. Atomic replacement of Fe^II by other metal(II) ions (e.g., Zn^II/Co^II) via synthesizing isostructural trinuclear-complex precursors (Fe₂Zn/Fe₂Co), namely the “heteroatom modulator approach”, is inhibiting the aggregation of Fe atoms toward nanoclusters with formation of a stable iron dimer in an optimal metal–nitrogen moiety, clearly identified by direct transmission electron microscopy and X-ray absorption fine structure analysis. The supported iron dimer, serving as cooperative metal–metal site, acts as efficient oxygen evolution catalyst. Our findings offer an atomic insight to guide the future design of ultrasmall metal clusters bearing outstanding catalytic capabilities.     

Direct Intermediate Regulation Enabled by Sulfur Containers in Working Lithium–Sulfur Batteries

Polysulfide intermediates (PSs), the liquid-phase species of active materials in lithium–sulfur (Li-S) batteries, connect the electrochemical reactions between insulative solid sulfur and lithium sulfide and are key to full exertion of the high-energy-density Li-S system. Herein, the concept of sulfur container additives is proposed for the direct modification on the PSs species. By reversible storage and release of the sulfur species, the container molecule converts small PSs into large organosulfur species. The prototype di(tri)sulfide-polyethylene glycol sulfur container is highly efficient in the reversible PS transformation to multiply affect electrochemical behaviors of sulfur cathodes in terms of liquid-species clustering, reaction kinetics, and solid deposition. The stability and capacity of Li-S cells was thereby enhanced. The sulfur container is a strategy to directly modify PSs, enlightening the precise regulation on Li-S batteries and multi-phase electrochemical systems.     

可磁分离的"核-壳"结构Fe3O4@SiO2/Bi2WO6/Ag2O催化材料的制备及光催化性能研究

采用沉淀-沉积法制备了磁性Fe3O4@SiO2/Bi2 WO6/Ag2O催化材料,利用XRD、SEM和UV-Vis-DRS光谱对其组成、形貌和光吸收特性进行表征.以氙灯模拟可见光,以罗丹明B为模拟污染物对所得催化剂进行性能评价,考察了不同Ag2O复合量对Bi2WO6光催化剂反应活性的影响.结果表明,Fe3O4@SiO2/Bi2WO6/Ag2O的光催化活性明显优于纯Bi2 WO6,当Ag2 O的复合量为0.6;时,催化剂的活性最好.催化剂的活性增强增强机理分析表明,Ag2O的复合有效地降低了Bi2WO6的光生电子-空穴复合率,增加了Bi2WO6的可见光吸收范围.此外,该催化材料可进行磁分离,易于回收重复利用.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

Synthesis of Giant π-Extended Molecular Macrocyclic Rings as Finite Models of Carbon Nanotubes Displaying Enriched Size-Dependent Physical Properties

Bottom-up synthesis of π-extended macrocyclic carbon rings is promising for constructing length- and diameter-specific carbon nanotubes (CNTs). However, it is still a great challenge to realize size-controllable giant carbon macrocycles. Herein, a tunable synthesis of curved nanographene-based giant π-extended macrocyclic rings (CHBC[n]s; n=8, 6, 4), as finite models of armchair CNTs, is reported. Among them, CHBC[8] contains 336 all-carbon atoms and is the largest cyclic conjugated molecular CNT segment ever reported. CHBC[n]s were systematically characterized by various spectroscopic methods and applied in photoelectrochemical cells for the first time. This revealed that the proton chemical shifts, fluorescence, and electronic and photoelectrical properties of CHBC[n]s are highly dependent on the macrocycle diameter. The tunable bottom-up synthesis of giant macrocyclic rings could pave the way towards large π-extended diameter- and chirality-specific CNT segments.     

A Polyoxometalate-Based Binder-Free Capacitive Deionization Electrode for Highly Efficient Sea Water Desalination

Capacitive deionization is a promising technique in sea water desalination. Compared with common electrodes, mixed capacitive-deionization electrodes exhibit better performance in sea water desalination because they integrate pseudocapacitance and electric double-layer capacitance in one system. Herein, a 3D binder-free mixed capacitive-deionization electrode was fabricated by direct electrodeposition of SiW₁₂O₄₀⁴⁻ and polyaniline on a 3D exfoliated graphite carrier. In this electrode, SiW₁₂O₄₀⁴⁻/polyaniline composite particles with a size of about 100–120 nm are dispersed homogenously on the 3D exfoliated graphite carrier. Its specific capacitance reaches 352 F g⁻¹ at 1 A g⁻¹. With increasing current from 1 to 20 A g⁻¹, the specific capacitance only decays by 32 %. When employed in sea water desalination, the performance of this mixed capacitive-deionization electrode is also excellent. At 1.2 V, the salt adsorption capacity of this mixed electrode reaches 23.1 mg g⁻¹ with a salt adsorption rate of 1.38 mg g⁻¹ min⁻¹ in 500 mg L⁻¹ NaCl. The performance of this electrode is well retained after 30 cycles. The excellent sea water desalination performance originates from the synergistic effect between SiW₁₂O₄₀⁴⁻ and polyaniline. This work has developed polyoxometalate as a new material for capacitive-deionization electrodes.